8-Plug, 208-240 VAC Remote Power Management Switch. 10-Amp Units Require [IPS-800-CE]
уточняйте у менеджера
||8-Plug, 208-240 VAC Remote Power Management Switch. 10-Amp Units Require
Задать вопрос по товару
Servers, routers, and other electronic equipment sometimes "lock-up," often requiring a service call to a remote site just to flip the power switch to perform a simple reboot. IPS-800 Remote Power Management Switches give you the ability to perform this function from anywhere; just point your browser to the IPS-800\'s IP address, enter the secure user name and password, and you\'re just a click away from remote power On, Off or Reboot!
Two Convenient User Interfaces
The IPS-800 provides two convenient methods for accessing configuration and switching functions; The Web Browser Interface and the Command Line Interface.
The Command Line Interface is an ASCII menu system, which allows you to configure and operate the IPS-800 via telnet over TCP/IP network, via modem connection or via local PC using a terminal program such as Hyperterminal or TeraTerm.
Security and Co-Location
Access to the IPS-800 command mode is password protected to prevent unauthorized users from invoking sensitive switching and configuration functions. Both the Web Browser Interface and Command Line Interface require the user to enter a password before allowing access. Passwords transmitted via web browser use 64-bit encryption techniques to ensure that passwords remain protected and access to your equipment remains secure. Telnet control can be user-defined to a discrete TCP port, or completely turned off to ensure that no unprotected port is present.
The IPS-800 also features two different levels of operational passwords; the System Administrator Level and the User Level. The System Level provides access to all configuration and switching functions, while the User Level is limited to switching functions only. Each outlet can have a unique User Level password, and each user can either be allowed to control all plugs, or restricted to specific plugs selected by the Administrator.
Easy to Configure, Easy to Use
The IPS-800 can be configured via network, via modem, or locally via the serial console port. Easy to master, user-friendly menus and commands let you assign a location name, set system parameters and view plug status. Outlets can be switched on, off, rebooted or set to user-defined default status using plug numbers or names.
Reliability and Support
The IPS-800 is built in the USA and backed by a two year warranty. NetReach products are installed in thousands of network sites world wide. Our customers know they can depend on WTI for superior quality and reliability for their most mission-critical operations.
Control Power on any 230 VAC Powered Device via Internet, Web Browser, Telnet, Modem or Local Terminal
Remote Power Management and Control
Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devices
Dual Power Circuits: Up to 20 Amp Models
Total Up to 40-Amps Maximum Load
Eight (8) Individual Switched Outlets
Web Browser Access for Easy Setup and Operation
Encrypted Password Security
On / Off / Reboot / Default Switching
User-Defined Power-Up Default Status
IP Addressed, 10Base-T Interface
RS232 Modem / Console Port
Network Security Features
Manual Power Control Button
AC Input: Two Separate Circuits; 10 Amps Max. per Circuit
Voltage: 208 - 240 VAC 50/60 Hz
Connectors: Two (2) IEC-320-C14 Inlets
AC Output: Eight (8) Individually Controlled AC Outlets
Connectors: Eight (8) IEC-320-C13 Outlets
Current Load: Power Circuit "A": 10 Amps Max.
Power Circuit "B": 10 Amps Max.
Network Port: Ethernet, 10Base-T
Console/Modem Port: DB9M, RS232C, DTE
RS232 Coding: Serial ASCII, 7/8 Bits, No Parity, 300 - 38.4 Kbps
Physical / Environmental:
Height: 1.75" (4.5 cm) (One Rack U)
Depth: 7" (17.8 cm)
Width: 17.5" (44.5 cm)
(19" with Rack Mount Kit)
Shipping Weight: 10 lbs. (4.5 Kg)
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Humidity: 10 to 90% RH